Alignsat 1.8m Ka Band Antenna
Item No.: Ka03
Alignsat 1.8m Ka band antenna is a high performance antenna designed for Ka-band satellite communications. The antenna is a rugged, commercial quality product suitable for the most demanding applications.
- Alignsat 1.8m Ka band antennaDownload
Description
Description
Alignsat 1.8m Ka band antenna is a high performance antenna designed for Ka-band satellite communications, the antenna includes Feed Horn, Polarizer, OMT and Filter. The antenna is a rugged, commercial quality product suitable for the most demanding applications.
Features
- 4- pieces precision reflector
- Precision Az/El Mount, Hot-Dip Galvanized.
- Ring Focus antenna
- Linear or Circular Polarization
| Electrical Specification | ||||
| Type | AST-1.8Ka | |||
| Electrical | Ka-Band Circular | Ka-Band Circular | Ka-Band Linear | |
| Operating Frequency (GHz) Receive Transmit |
20.20 - 21.20 GHz 30.00 - 31.00 GHz |
19.40 - 21.20 GHz 29.20 - 31.00 GHz |
18.70 - 21.20 GHz 27.00 - 31.00 GHz | |
| Midband Gain ( +/- .5 dB) Receive Transmit |
49.60 dBi 52.90 dBi |
49.40 dBi 52.70 dBi |
49.50 dBi 52.60 dBi |
|
| VSWR | 1.3:1 max | 1.3:1 max | 1.5:1 max | |
| Beamwidth(-3 dB ) | Rx: 0.56° Tx: 0.38° | Rx: 0.57° Tx: 0.39° | Rx: 0.58° Tx: 0.40° | |
| Antenna Noise Temperature 10° Elevation 20° Elevation 40° Elevation |
131 K 108 K 94 K |
131 K 108 K 94 K |
134 K 111 K 97 K |
|
| Power Handling | 100 W | 100 W | 100 W | |
| Cross Polarization Isolation On Axis Within 1.0 dB Beamwidth |
26dB 25dB |
26dB 25dB |
35 dB 33 dB |
|
| Output Waveguide Interface Flange | Rx: WR42 Tx: WR28 | Rx: WR42 Tx: WR28 | Rx: WR42 Tx: WR28 | |
| First Side lobe90% Peaks under Following Envelop |
-14 29-25logθ(1°≤θ＜20°) |
|||
| Mechanical Specification | ||||
| Antenna Diameter | 1.8m | |||
| Antenna Type | Ring Focus | |||
| Surface Accuracy（RMS） | ≤0.3mm | |||
| Antenna Pointing Range | Azimuth Elevation Polarization |
0°~360°，±10°(Continuous) 0°~90°(Continuous) ±360°(Continuous) |
||
| Drive Mode | Manual or Motorized | |||
| Antenna reflector Material | Aluminum Alloy | |||
| Finish of steel parts | Hot dipped Zinc | |||
| Environmental Specification | ||||
| Operational Wind | 72km/h gusting to 97km/h | |||
| Survival Wind | 216km/h | |||
| Temperature | -40°~+60° | |||
| Relative Humidity | 100% | |||
| Solar Radiation | 1135Kcal/h/m² | |||
| Seismic(Survival) | 0.3g(H), 0.15g(V) | |||
| Ice Loading | 13mm Operational; 25mm Survival | |||